Differences

This shows you the differences between two versions of the page.

--- build [2017/12/02 21:14]
Julien Dorra
+++ build [2017/12/02 21:20] (current)
Julien Dorra [Cutting]
@@ Line 55: / Line 55: @@
 **Manually**: You can cut Totem bases using a rotative cutting blade. Foamwerk sell one that work well. It's relatively cheap, easy and can be done anywhere.
-**Laser cutter**: You can also use a laser cutter. It'll allow you to cut more complex designs like the ([[beveled disc base|beveled disc base]] or the [[connect square base|connect square base]].
+**Laser cutter**: You can also use a laser cutter. It'll allow you to cut more complex designs like the ([[beveled disc base|beveled disc base]].
-Of course check that you have proper ventilation and filtration for the fumes.
 The foam retract with heat: set your laser to a very low power and use several passes to cut the foam.
 **Water cuter**
-they work better than laser cutter as they don't burn the foam but they are much rarer than laser cutters.
+They work better than laser cutters as they don't burn the foam. But they are much rarer than laser cutters.
-**Mechanical cutter**: Not Tested. Please help by testing with the [[beveled disc base|beveled disc base]] and reporting here! :-)
+**Mechanical cutter**: **//Not Tested//**. Please help by testing with the [[beveled disc base|beveled disc base]] and reporting here! :-)